1. Using Chem-Dry's exclusive stain remover, this is how you would deal with stains.
2. Blot up any surface liquid, or in the case of other spills, remove as much of the spillage as possible.
3. Holding the Chem-Dry Stain Extinguisher™ approximately 12" away, direct the spray to cover the whole of the stain.
4. Using the bottom of a dessert spoon, agitate the solution on and around the stained area.
5. With the cleaning cloth apply pressure and blot up the Chem-Dry Stain Extinguisher™. Never rub the stain or you could damage your carpet.
6. It may be necessary to repeat the above process several times on particularly stubborn stains.
   

1. Using Chem-Dry's exclusive stain remover, this is how you deal with stains.
2. Blot up any surface liquid, or in the case of other spills, remove as much of the spillage as possible.
3. Lightly spray the stained area with clean water.
4. Holding the Chem-Dry Stain Extinguisher™ approximately 12" away, direct the spray to cover the whole of the stain.
5. Using the bottom of a dessert spoon, agitate the solution on and around the stained area.
6. Blot up the Chem-Dry Stain Extinguisher™ using the cloth, do not rub, until the stain disappears.
7. It may be necessary to repeat the above process several times on particularly stubborn stains.
   

There are some spills and stains that are impossible for the householder to deal with. The Chem-Dry professional has the know-how, equipment and solutions necessary to remove most stubborn stains. We therefore recommend that in the event of such an emergency the following procedure will minimise damage.

1. Act immediately before the spills or stain spreads too far or penetrates the fibres.
2. Scrape up as much as possible with a spoon or palette knife (i.e. a blunt edge).
3. Always work towards the centre of the spillage to avoid spreading.
4. Blot up liquids with a clean cloth, towel or kitchen paper.
5. Use plain warm water to dampen and blot the spill without rubbing.
6. Keep spill or stain moist with a little water and keep a damp cloth spread over the area until help arrives.
7. Cover gloss paint with clingfilm or polythene to prevent drying.
   
   

1. Lift the carpets or roll them up.
2. Rub the stain. Always blot it up.
3. Try to dry out by applying heat.
4. Use solvents, detergents, turpentine or other solutions.